The Forsaken Artifacts: Crude Stone Tools

by Kenneth B. Johnston

Kenneth Johnston — Tue, 22 Mar 2011 16:26:00 GMT

© 2003-2011 Copyright Kenneth B. Johnston All Rights Reserved

"Forsaken Artifacts: Crude and Opportunistic Stone Tools" Published 2007 in Currents of Change, the irregular journal of the The Falls of the Ohio Archaeology Society (FOAS), Louisville, KY. Author retains all copyrights.

email: kennethbjohnston@hotmail.com
Location: Licking Township, Licking County, Ohio, U.S.A.

__________________________________________

Pleistocene Coalition News
readers please see links below

Portable Rock Art
http://portablerockart.com

See the 11.2 lbs stone carved lion's head described in
"A Pair of Eyes or Pareidolia?"
Subtle Artifacts: Flint Sculptures and Figure Stones"
http://subtleartifacts.com

(sample)
I. INTRODUCTION
In 2010, seven flint sculptures were found in close common context in disturbed garden soil, Licking County, Ohio. The material is Vanport chert, locally sourced from Flint Ridge, arguably one of the most beautiful and highest quality cherts in North America. The artifacts were initially identified as flint manuports for intended tool manufacture but a later closer examination revealed significant human agency on the artifacts with intended anthropomorphic and zoomorphic iconography. The primary images depicted by the sculptures, each standing in correct viewing orientation on a designed base, has been interpreted after much consideration and research as follows:

1) Feline head (“lion”) 11lb slightly curved and leaning panel which stands upright

2) Human head 11lb sculpture in the round with grotesque left eye depiction

3) Flint and crystal owl with bird at eye in movement, third bird perched at beak

4) Rabbit/ground squirrel split animals sharing same prominent teeth in stone

5) Human head sharing horned bovid head/eye, second profile with proboscidean ear

6) Short-faced bear head split with crude human head

7) Letter “n" skull shaped sculpture with bearded man profile facing away, Janus-like

R. Wilson writes of (Patterson 1983):
"He places value on recognising the patterns that characterise artefactuality including frequency: Even if nature can produce lithic objects resembling simple man-made items, nature is not likely to do this often. Therefore, the frequency of occurrence at a given location of specimens with similar morphologies is important in demonstrating probable manufacturing patterns. Production of numerous lithic specimens with consistent morphology is certainly not a habit of nature. (Wilson, 2010). (emphasis added in bold)

http://subtleartifacts.com

_________________________________________

#59 Photo slideshow of Buckeye Lake stone tools, (same as the forsakenartifacts.com featured tools)

http://s813.photobucket.com/albums/zz56/kenbjohn/Forsaken%20Artifacts%20Originals/

Forsaken Artifacts: Crude Stone Tools

INTRODUCTION
In 1998, I began surface collecting for artifacts in fields and at construction sites near my home on Buckeye Lake, in southern Licking County, Ohio. Soon after I started scouring the ground in search of points, the only artifacts I knew of at the time, I noticed a pattern of an over-abundance of hard stone rocks about the size to fit a hand and sometimes presenting somewhat common shapes and features. They were concentrated in certain areas, such as on a rise in a plowed field, near artifacts, or amidst flint debitage. I began to more closely examine all the stone material I found. I took stones home and removed soil by rinsing in water.

What emerged, to my thinking, were artifacts- the rocks appeared to have been modified by humans. I became so interested in these stones I began to seek them as my primary prey in artifact hunting. Over the years I have collected them and I’ve developed acumen for them. I have found them in several Ohio counties such as Perry, Fairfield, Delaware, Franklin, Hocking, Morgan and Summit. Most of the artifacts in this paper are from the Buckeye Lake area, specifically, Licking and Union Townships in Licking County, but a few are from the aforementioned counties.

Buckeye Lake as it sits today is man made, created as a feeder reservoir for the Erie and Ohio canal system. In prehistoric times it may have been a somewhat ephemeral swamp/lake-land area. Its use by early inhabitants has been described: “"Big swamp," or "Two lakes," sometimes, also, called by the Indians "Big lake," and "Little lake,"' or what is now called the Reservoir, was resorted to by the Indians, in considerable numbers, for the purpose of fishing” (Hill, 1881:490).

As an ironic aside, here is an account of the construction of the reservoir: “The Mound Builders' works are found in various parts of Licking Township, the stone mound about a mile south of Jacksontown being of the greatest magnitude. It was of gigantic proportions, measuring one hundred and eighty-three feet in diameter at its base; and when found by the pioneer settlers, was between thirty and forty feet in height. Many hundred wagon loads of stone were removed from it, and used in the construction of the reservoir…(Hill, 1881:489).”

The Wisconsinin Glacier advancement boundary line runs through Licking County. Most all the raw material for the tools of this paper is likely sourced from terminal moraine deposits. The proximity of Flint Ridge to cobble and pebble deposits from glaciated times made for a rich and diverse source of lithic resources for the early inhabitants of the region. Artifacts from all temporal and cultural periods have been found in abundance in this area.

DEFINITIONS

The following are the definitions in use for purposes of describing these artifacts.

-An opportunistic stone tool is a rock selected for its naturally advantageous form, not modified for use, but exhibiting evidence of handling and/or wear.

- A crude stone tool is an opportunistic rock which was more so modified for use by making breaks, chips, or by grinding, etc. to achieve the desired end-form, and also exhibiting evidence of handling and/or wear.

Eventually I began to examine rocks smaller than the hand-sized ones I noticed at first, and discovered some of them, too, indicate evidence of human modification. These are the definitions I apply to the larger and smaller tools. These definitions are different from ones used by other archaeologists and geologists:

- A cobble tool is one held in the hand and with contact with the palm

- A pebble tool is one held by and in contact only with the fingers and thumb

THE SEARCH FOR INFORMATION

Following my interest, I set out to learn what others have written and know about these types of tools. Reference material about crude tools seems scarce, at least to this layperson. Smaller pebble tool information seems non-existent. I have found some information about crude tools interspersed with information about more refined stone artifacts. Crude and opportunistic artifacts covered in the literature are certain abraders, hammerstones, grinding stones, cup stones, pestle-rubbers, for example. However, many of the artifacts I have found differ from the well documented types. The tools which are well documented seem to yell “artifact!” even though they are considered crude. Many of the tools I have found have very slight features. They only whisper. They are the crude of the crude.

I have not found them listed on inventory lists from archaeological sites. I have not found any books or articles dedicated to them. Not even easy-to-publish, and to search for, internet sites. I have not been able to determine if they are recognized or studied by archaeologists in all the diversity I have found.

I have spoken with many professional, academic, and hobby archaeologists, artifact collectors, artifact dealers, geologists, authors and a consultancy, all of whom shrugged unknowingly, or worse- discouraged me from wasting my time.

I am most interested if readers can direct me to reference material or people with knowledge in this area. I wonder if any of the artifacts shown here look familiar to anyone.

INTERPRETATION

It is easy to find rocks anywhere which “sweetly fit in the hand” which are of course not artifacts. The line of inquiry into crude stone tools undoubtedly enters a very highly interpretive area. However, such interpretation is precisely the job, and the duty, of the archaeologist. I have set out here to describe some general characteristics and more specific attributes based upon my own casual observations.

Context is first. To be considered are: a) the micro context, such as finding rocks or pebbles among flint debitage or artifacts, and; b) the macro context, such as “very near Buckeye Lake and in an area which is known as a rich source of artifacts,” and; c) a self-referential context, when a) and/or b) may be unknown, but several cobbles or pebbles are found in near proximity to each other, which are candidates by their attributes to be crude or opportunistic tools, and possibly even an assemblage of tools.

An important trait of crude tools is they are very often asymmetric. If one splits the artifact down the “middle,” the two halves are likely to be very different. This is unlike most other well described lithic artifacts such as points, knives, axes, adzes, celts, pendants, grooved hammerstones, etc.

Unlike more obvious artifacts, crude stone tools often have very subtle characteristics. Some or most of the surface can be the original natural surface of the rock. There may be some chipping, grooving or grinding to enhance grip but it can initially appear to have been caused by natural forces until other attributes are correlated to the tool.

Some were likely tools of relative expedience, made on the fly and used very briefly as compared to artifacts which indicate more time involvement in manufacture. Thus, detectible wear surfaces may not be well developed, but must be present unless there are several other very clear attributes indicated. I use a 10x lighted magnification scope to confirm and analyze wear surfaces and the like. Crude tools may not suggest “artifact” until a very careful analysis has been made. It would be easy to decide “just a rock” in the field, or even on the work table, and not pick them up or examine them further.

There should be a concurrence of the wear surface with the most advantageous grip of the tool. That is, when the tool is held in the hand in the way it feels “sweet,” the wear surface should present itself where it would be optimally accessed and utilized.

I am right-handed and think it is possible my collection is biased toward right-handed tools. The interpreter needs to be aware of this possible bias and hold potential artifacts in both hands to determine what the functional grip on that tool was. I may have pitched some when I was not able to detect a good working grip, when it could have been detected by working with the stone in my left hand.

Some more specific attributes: indications of removal of material to achieve a better general tool shape; a shape that seems molded to the hand like a ball of clay would be after squeezing; a narrowing, cone like shape; patina differences on the wear surface, the “air surface” (not in contact with anything during tool use) and the surface which would have been in contact with the skin; handling wear, where evidence of contact by the fingers or thumb is present; thumb pads created for optimal thumb contact; notches, rough spots and gashes created for placement of the grip of fingers and thumb; ridges and angles to accommodate the gripping hand; secondary or multiple wear surfaces as sometimes different parts of the tool were utilized; a knob emerging from between the thumb and index finger to improve grip; pitting; flattening; smoothing; evidence of percussion; a “push-butt” for the base of the palm, or in the case of pebble tools the thumb, to gain force and leverage on the tool; pebble tools can have a shape and feel similar to a piece of chalk in its last moments of use. The more attributes connected to a stone, the more sure one can be it was a tool.

Once a positive interpretation has been made, if one needs to quickly and easily communicate the grip of the tool to another, the tool may be marked with red, white and blue dots of nail polish where contact with the thumb, index and middle finger, respectively, was made. It is then possible for anyone not in the presence of the interpreter to pick up the tool and hold it the way it was held during active use.

Because of their lack of symmetry and complex three-dimensional nature, it is difficult to communicate the significance of opportunistic and crude cobble and pebble tools in words or in the two dimensions of photographs. The photos in this paper are for the most basic illustrative purposes. Holding the artifacts in the hand brings their splendor to life. All the artifacts shown in this paper are available for examination by any interested party.

THE IMPORTANCE OF CRUDE TOOLS AND A CALL FOR ATTENTION

There is a bias to flint, and flint like materials, in archaeology which needs to be countered. Flint occurs naturally in outcroppings in fixed places. It is easier to source-identify, easy to surmise how far it was carried or traded. When flint is found away from its natural source, it is easier to conclude a human left it there. The raw materials of crude tools have often been dispersed or occur naturally over broad areas. Sometimes the only specificity of source is something like “from the glaciers from the north” or “from the river valley floor.” Thus, very crude types of flint tools, such as utilized flakes and little worked pieces, have been well studied and documented in much variety. Similarly, bone artifacts seem to get sufficient treatment by archaeologists and collectors. When bone occurs in the context of other artifacts it is within reason humans may have left it there and it gets consideration. Failing to pay close attention to every cobble and pebble at archaeological sites is akin to ignoring bone material or anything of flint that is not high art.

Formally trained archaeologists tend to want “data, data, and more data,” which is well enough. However, data is much more difficult to assemble without clear classification and order. The symmetric nature and common stylization of finely worked flint and stone artifacts lends itself easily to classification, thus lithic tool data is slanted toward them. Symmetry is easy for the human eye to catch and a lack thereof may be a reason why crude artifacts have received such limited treatment by collectors and archaeologists.

Because of the biases to flint and the need for ease of classification, many archaeologists and collectors have been rendered blind to the possibility of the prolific existence and amazing uniqueness among crude stone tools. Many are probably one time occurrences. They are the snowflakes of stone artifacts. Their inclusion will greatly expand the early inhabitants tool-set available for study.

There is much work for archaeologists to do in this area. For example, each rock or pebble from a site should be very closely inspected for crude or opportunistic tool attributes. If positive for attributes, they should catalogued, measured for length, width, weight, and volume, the raw material identified, and each attribute observed entered into a database so patterns of commonalities and differences can be analyzed. Attributes not yet noticed will need to be described. Only if negative for any crude tool attributes should rocks and pebbles be disposed of. Maybe some discrete, definable types will emerge from compilations of the data. For example, rather than just a “crude hammer,” maybe there are several discrete types of crude hammers which can be described.

Crude and opportunistic tools are also overlooked by archaeologists because they do not, at this time, suggest any temporal or cultural affiliation. Only with the work of data gathering from archaeologists could such affiliation ever come to light.

Crude stone tools may be a source of substances for material analysis. Five artifacts illustrated here each have different foreign substances on their surface. It has not been determined what they are and it may be that all are substances from natural earth processes. However, in each case, the substance is located only on the wear surface of the tool and no where else on it. In one case, I prodded the particularly craggy wear surface of a crude two-handed pestle with a needle and a fibrous plant material emerged from the cracks.

Crude tools can assist in site and area activity analysis. For example, a count comparison of tools used for polishing, abrading, grinding and pounding may be made. Or, a particular raw material may be correlated to polishing and finding an abundance of it at a site may be a good lead to follow.

Crude stone tools may be helpful in identification of temporary sites, where more refined artifacts are less likely to have been left behind. Places of transient occupation such as camp sites, kill sites, or places used for on-site processing of locally abundant plant material, may be confirmed or may come to light using crude tool analysis.

Crude tools may provide insight into the lithic material culture and understanding of early inhabitants. For example, it seems they were able to predict fracture results of different rock types the way breaks are predicted in flint tool manufacture. Data may eventually show a preference for certain rock types for certain uses.

Relationships between geographically disparate sites may come to light. For example, tools looking a certain, unique way, made of the same material, may be found at sites (d) (g) and (p), but no others, of sites (a – z). Perhaps, then, (d, g, p) are related.

It may be possible crude stone tools can help indicate differing economic or sub-cultural classes. For example, maybe there is a concentration of fine hard stone tools in a certain area of a site while they are not found in other areas. If crude tools are identified from other areas of the same site, there could a reason. Perhaps the tools of substantial time investment were used by the wealthy or influential, or for ceremonial purposes, while the every day work of everyday people was done with the cruder tools. Now, it seems, archaeologists may assume there were no tools found in certain area, when they were present in crude forms and have simply been overlooked.

It seems very unlikely the majority of stone tools were finely made. It seems likely that peoples who used more finely developed tools did not use only them, exclusively. It seems quite possible some peoples, at some times and places, particularly during the paleo and archaic periods, did not ever use finely ground or polished tools. Where is the accounting for all the other, crude, stone tools?

Crude tools must have been used in the manufacture of the fine ones. What were their “meta-tools,” the tools used to make the other tools? Where is the accounting for the crude meta-tools of fine stone artifacts?

IN CONCLUSION

Though in his seminal work “The Stone Age of North America” he never documents any crude or opportunistic stone tools as are covered here, Warren K. Morehead’s words from another work seem apropos. Appreciate he wrote these words one hundred and ten years ago:

“… The museums are full of axes, celts, pipes, banner stones, discoidals, hematites, tubes, slate ornaments and ceremonials, pestles, hammers, etc. What the museums need (as of great value to Archaeological Science) are collections from a single locality including everything found in that locality. They want the finds of the village site, the studies in unfinished specimens, the poor and the good, the imperfect as well as the perfect. In this regard, the collectors make a great error. Most of them do not save everything but cling to the ‘pretty relics’ and discard the rough and the rude. Personally, I would give more for a collection, provided it contained all the types, all the finds of a certain valley than for just the fine, perfect objects of that valley. From a collection of the latter, I would be misled, for if I accepted it as indicative of the people of that valley, I would say they made the most beautiful works of aboriginal art, nothing rude or unfinished being turned out by their artisans. In such a statement, I would unpardonably wrong (Moorehead, 1884-56).”

By their very nature, there is a most fundamental aspect to crude stone tools. They are universal, but also differing from place to place, to be found almost anywhere human beings have been and lived, in any time or culture of interest to early human collectors and scholars. They are the base of the artifact pyramid. I think there is a good possibility crude stone tools may indeed be the most commonly available early inhabitants’ artifacts for collection and study. The greater inclusion of them will immensely expand the stone tool universe available for archaeological study and analysis. They must stand as a distinguished and celebrated class of artifacts, not just dissed as stones too close to items of natural chance or coincidence.

Using the attributes and features described here, and ones yet to be identified, any Argus-eyed archaeologist or collector should be able to present a compelling case for the existence of cobble and pebble tools along with, and in greater numbers, than more fine artifacts. Beauty may be found in their workmanship, simplicity and functionality. They appear to have been overlooked, set aside or discarded. Let them be forsaken no more!

REFERENCES

Hill, N.N. Jr. (compiled by)

1881 History of Licking County

Moorehead, Warren K.

1894 “Information for Collectors,” The Archaeologist, Vol. 2 No. 2.

ACKNOWLEDGEMENTS

I would like to thank Kathleen Johnson, photographer of my artifacts, who did such fine work.

© 2003-2010 Copyright All Rights Reserved. Academic and personal use of written and photographic material herein is permitted with source and author citation.
_____________________________________________________
recommended website by author
L. Jimmy Groen
Maastricht, The Netherlands
homepage Retouche

http://retouche.webklik.nl/page/home

Photo 1

Kenneth Johnston — Sun, 11 Jun 2006 01:59:00 GMT

These kinds of crude stone tools are often recognized as such, unlike "forsaken" artifacts.

Photo 2

Kenneth Johnston — Sat, 10 Jun 2006 23:07:00 GMT

Two similar forms. Perhaps crude stone tools can be organized or classified.

Photos 3

Kenneth Johnston — Sat, 10 Jun 2006 01:28:00 GMT

(top) Shows surfaces created to accomodate fingers. (bottom) Top view of tool showing pit at left where material was likely worked. (not shown) groove on backside and bottom of tool to accomodate the thumb.

Photos 4

Kenneth Johnston — Thu, 08 Jun 2006 02:17:00 GMT

(top) This stone has been reduced to create angles and surfaces to fit precicely in the palm. (middle) Top view of tool in palm showing "nob" emerging between index finger and thumb to improve grip. (bottom) Bottom view of working surface of tool when held.

Photos 5

Kenneth Johnston — Wed, 07 Jun 2006 03:56:00 GMT

(top) Opportunistic tool example. The natural form of this tool is angled and tapered to provide a handle. It is not, or perhaps very lightly worked, perhaps a few breaks to improve grip. (bottom) After washing the tool in water to remove dirt, a washboard-like parallel grooved working surface was revealed. The surface appears suitable for grinding plant material. This tool was found on the banks of the Olentangy River, Whetstone Park, Columbus, Ohio.

Photos 6

Kenneth Johnston — Tue, 06 Jun 2006 04:10:00 GMT

(top) The original "mice." These tools all have an ergonomic shape very similar to a computer mouse. They all fit snugly in the curved palm and present a flattened wear surface. (bottom) Two of them as held, showing wear surfaces.

Photos 7

Kenneth Johnston — Mon, 05 Jun 2006 04:21:00 GMT

(top) Two deep grooves on top of this pebble tool to accomodate index and middle fingers. (bottom) In natural form this pebble tool was originally rounded. Two skillful and similar breaks were made to remove material from each side of the top provide a ridge to allow a grip and perfect fit for the index and middle fingers. The bottom and the front tip of this tool indicate wear.

Photo 8

Kenneth Johnston — Sun, 04 Jun 2006 04:33:00 GMT

This tool has wear pads where the thumb and index finger came into contact with it. It appears to have been used much like a modern pool cue chalk by inserting a stick or bone and then rotating the tool. The hole is wide on the outside and tapers to a point inside the tool. I wonder if it could have been used to sharpen something like an antler tine.

Photo 9

Kenneth Johnston — Sat, 03 Jun 2006 04:44:00 GMT

All of these tools have what I believe to be residual material on what would be the working surface. The material respective to each tool is not present anywhere else on the tool, only on the bottom. Crude stone tools should be an important resource in material analysis archaeology. Material ranges from chalky white concretion on tool in upper left, to black, pitch-like substance on tool in lower right. They all, of course, fit the hand perfectly.

Click on OLDER POSTS BELOW FOR MANY MORE PHOTOS

Photo 10

Kenneth Johnston — Thu, 01 Jun 2006 05:03:00 GMT

This tool tapers perfectly to be stabalized by the left hand while providing a working surface. The single, large, groove running from side to side could have been used to provide a place to work an intermediate material with another hand tool, or it could have been used to work other stones directly.

Photos 11

Kenneth Johnston — Thu, 01 Jun 2006 04:00:00 GMT

An assortment of pebble tools. All of these were found in the context of flint artifacts and debitage and other stone tools. They all exhibit what appears to be a wear surface and show evidence of handling. Material ranges from hard white quartz to a talc like, chalky material. Some of these pebble tools are worn down like a piece of chalk and you can tell they were held that way. These were found in adjoining fields along the north shore of Buckeye Lake. Pebble tools are difficult to identify in the field because they are so small. They are always interspersed with geofact pebbles and it takes time to evaluate them. All material at sites should be considered before being discarded- down to the last pebble.

One of the rocks from the above group

I call this a "finger pestle."

Photos 12

Kenneth Johnston — Thu, 01 Jun 2006 03:18:00 GMT

I call these "lap anvils." They appear to have been used to present a hard working surface that can be stabalized with a hand and a leg. The top photo is a view of the top working surface of each, and the bottom photo shows the curved bottom of each which sits nicely on the leg. The bottom anvil in the bottom photo is being propped up with another rock to help illustrate the curve. These were found in the same artifact field.

Photos 13

Kenneth Johnston — Thu, 01 Jun 2006 02:30:00 GMT

These are all examples of the all purpose hand tool, perhaps among the most common and basic of all the tools used by original inhabitants. Could be used to grind, abrade or pound- maybe even as a weapon. A kind of "stone knuckles."

Photos 14

Kenneth Johnston — Thu, 01 Jun 2006 01:50:00 GMT

These three tools have the same attribute, that when held in the hand, are balanced so that you are able to produce an almost "motorized" rapid rocking motion. They have points that protrude like wear bits, see left side of each tool in group. Based on my observations of modern day flintknappers, I wonder if these were for that purpose. Two were found together near a several pound block of flint in the residential Clintonville area of Columbus, on a ravine hill overlooking an Olentangy river tributary. The third (middle one in group picture) was found in a field near Buckeye Lake Ohio, amongst flint debitage.

(Top tool from above photo) This tool has a handle that cradels the thumb and index finger. There is a hole in the tool right where your index finger goes. I see holes used like this to provide improved grip and control of tools.

(Middle tool from above group) As held...

(Bottom tool from above group) This tool has grip pads for the thumb and index finger. The wear tip has been broken/worn down.

Above pictured tool showing hole in tool for middle finger tip to rest in

Photos 15

Kenneth Johnston — Thu, 01 Jun 2006 00:17:00 GMT

I believe these to be a tool set. They were found in immediate proximity to each other on the bank of a kettle-like sinkhole along the north shore of Buckeye Lake during a severe summer drought where they were left exposed on the surface. Each is a fine example of a crude stone tool and this may have been an assmeblege from someone's kitchen in the past. They very greatly in size, one taking a large strong hand to handle with ease, another seemingly small enough for a child to have used.

This is the tool from the two o'clock position in the above photo, shown as hands grip it most effectively in a slightly offset "praying" position. This is made from a green stone material that seems to have been used rather frequently. The next photo below shows the bottom wear surface of the tool as it is clasped in the hands.

This is the tool from the top of the group photo, shown as held in the hand

Link to Day's Knob website

Kenneth Johnston — Tue, 30 May 2006 17:54:00 GMT

Alan Day is an Ohioan who has an excellent web site presenting his finds and theory about human and bird effigies and images in crude tools and art forms. He calls his site (and web site) Day's Knob.

http://www.daysknob.com/